Becuase of Smart Wifi I Will Never Buy a Linksys Router Again

There are three reasons why the Wi-Fi connection between your Linksys router and your devices such as computers, laptops, PS3™ and Xbox 360^® is intermittent or is experiencing a dropping connectedness.  These are:

• Frequency interference from other Wi-Fi devices
• Low indicate quality received from your Wi-Fi router
• Router'due south firmware needs an upgrade

Frequent Wi-Fi disconnection can be resolved by doing the post-obit:

• Reducing Wi-Fi interference
• Customizing the Wi-Fi settings of the router
• Updating the firmware of the router

Note: Before following the steps in this commodity, check if your wireless devices take stable connection when continued to other Wi-Fi.  To investigate the trouble, check the Wi-Fi connectivity of other Wi-Fi devices in the network.  To learn how to check Wi-Fi connectivity with your Linksys router, click here .

For a list of other common Linksys router bug and how to resolve them, click here .

Reducing Wi-Fi interference

If y'all are experiencing frequent disconnection from the Wi-Fi, make sure to check the post-obit factors as all of these tin profoundly affect your Wi-Fi signals:

• 2.iv GHz interference - Your router may exist operating on the same frequency every bit your cordless telephone system or other nearby devices.  Try to change your router's aqueduct to ane or 11 (the default channel is 6) every bit these are considered non-overlapping channels.  After irresolute channels, restart the Wi-Fi devices.  To larn how to change the router's channel using the classic spider web-based setup, click hither .  For Linksys Smart Wi-Fi users, click hither .  If y'all are using Velop, click here .

• Physical obstructions - Your Wi-Fi device may be losing connectivity because of physical obstructions such equally walls and floors.  Effort to move your devices to a different location to discover a better bespeak.

• Placement of the router - Information technology is recommended that yous place your router as high off the ground equally possible.  When placing the router in a high location, get out a distance of 2 feet betwixt the router antenna tips, ceiling, and wall.  If your bespeak passes through multiple floors, place the router on the upper-almost flooring, and high upwards in the room.

QUICK TIP:  The most ideal location for your router would be at the key part of your house.

When using your Wi-Fi device, avoid moving closer than 18 inches from the router equally this radius around the router is considered a Wi-Fi dead zone.

• Environs - Keep the router abroad from large metallic objects, areas where in that location may be a large concentration of h2o (fish tanks, bathrooms), and any electrical equipment including boob tube sets, microwaves, radios, etc.

Customizing the Wi-Fi settings of the router

Having default Wi-Fi settings on the Linksys router may cause conflict with other Linksys routers inside your network range.  It is recommended to change the Wi-Fi name (SSID) of your router as well as enabling its Wi-Fi security.

• To learn how to change the router'south Wi-Fi proper noun (SSID) using the classic web-based setup, click hither .  For Linksys Smart Wi-Fi users, click here .
• To learn how to enable the router's Wi-Fi security or passphrase, click here .  For Linksys Smart Wi-Fi users, click hither .
• If you are using Velop, click here  to learn how to modify your Wi-Fi proper name and countersign.

Information technology is highly recommended to use WPA™ or WPA2™-Personal every bit your security blazon.  Other than providing better security, this will plant a stable connexion with your Wi-Fi device, especially devices with the latest technology.

Updating the firmware of the router

If the Wi-Fi connection remains unstable after performing the steps above, you may need to upgrade your router's firmware.  For instructions on how to reload or upgrade the firmware, click here .  For Linksys Smart Wi-Fi users, click hither .  If you are using Velop, click here .

Note: Afterwards you lot take successfully updated your router's firmware, ensure that your device's Wi-Fi adapter is too updated.  You may contact the device manufacturer for assistance.

Connecting Wi-Fi devices

Afterwards going through the above configurations in resolving your dropping or intermittent Wi-Fi connection, y'all may need to reconnect your devices to the network.  Click on the links below to learn how:

Calculation a wired computer to a Linksys router
Connecting wireless computers to your network
How to connect wireless devices to your network using the Linksys cloud account
Connecting and configuration tips for your Android™ devices
Connecting and configuration tips for your game consoles
Connecting and configuration tips for your network printer
Connecting and configuration tips for your network storage drive or wireless camera

robinsondivive.blogspot.com

Source: https://www.linksys.com/us/support-article?articleNum=142891

Share this post